Brian @ Hackszine writes –
Ever since I got my first set-top box at the end of last year, I’ve been itching to connect its FireWire port to my Mac. My friend Emilie called today to alert me to a CBS Sunday Morning report on Maker Faire, which I managed to record, and that gave me the push I needed to figure this all out.
There are a few sets of instructions out there on how to do this, but in a nutshell, you connect your Mac to the set-top box, load up a program that can record directly from FireWire set-top boxes (unfortunately, iMovie won’t cut it), and do whatever editing you need to the video once you’ve brought it in.
I found that Ammesset Software’s iRecord did the trick perfectly: I checked its preferences to make sure that my Motorola DCT-6412 was detected, told my set-top box to start playing back the video I had recorded, and selected New Immediate Event from iRecord’s File menu. When it was done, I selected Stop Event from File menu.
This left me with a .m2t file that I didn’t know what to do with at first. Squared 5’s MPEG Streamclip is a free program that can open and convert all kinds of streams. Using MPEG Streamclip, I was able to trim the clip and export it to one of the many supported codecs.
Resources
4 thoughts on “Export video from your set-top box to your Mac”
Comments are closed.
ADVERTISEMENT
Join Make: Community Today
A windows write up can be found here
replayguide.sourceforge.net/dct6412/
although the mac way certainly seems easier.
This has also been available for a while for Windows XP Media Center Edition (MCE). This package integrates fairly well with the MCE 10-foot UI, and also lets you grab the clear HDTV channels from your digital set-top box.
http://home.comcast.net/~timmmoore/firewire/readme.htm