Last minute gifts from MAKE - Maker Shed gift certificates & gift subscriptions are now available!

HOW TO - Install a remote control/tracking system (MFC) in your ride

Fuelprelay
Sam shows you how to install a remote control/tracking system (MFC) in your ride, he writes -

...the Subaru WRX we showed at the Maker Faire features a remote tracking and control system. With this system you can:
  • Log in from anywhere in the world and see where the car is
  • See engine status, RPMs, speed, GPS info, and a bunch of other stats
  • See history of location and statistics
  • Unlock or lock the doors
  • Start or stop the engine
  • Cut power to the fuel pump
  • Control Windows, etc.
It doesn't take much imagination to figure out the possibilities. Imagine a script that checks for upcoming appointments in your computer's calendar. 15 minutes before you leave for the appointment, your script logs in, finds your car's location and pulls the weather for the area. If the temperature is below 40 degrees, the script will send the commands to start your car. You get in 15 minutes later and everything is warm and toasty!
DIY:happy ยป How to Install a Remote Control/Tracking System (MFC) in Your Ride -Link.

Posted by Phillip Torrone | May 29, 2007 04:00 AM
DIY Projects, Transportation | Permalink | Comments (2) | Email This | Bookmark and Share | Digg this!


Recent Entries

Comments

Oldest comments listed first.

Posted by: giraffenecktie on May 29, 2007 at 1:41 PM

I can't believe you suggested running a car for FIFTEEN minutes just to have it nice and warm for the driver.

Aside from the fact that it's not particularly good for modern engines (even in cold weather), you might want to consider the effect on the environment.

For shame!


Posted by: gthing on May 29, 2007 at 3:19 PM

Using a script to warm up your car is only one example. You could also do environmentally friendly things like crack your windows (short pulse) if the temperature gets hot enough and that will help you avoid needing to use air conditioning.

As for warming up your car, depending on how cold it is - it is good to get everything flowing (oil/transmission fluid/etc) and defrost the windows (because it's safer if you can see when you're driving). If you don't warm it up it won't hurt your car, but you should not rev the engine very high until it's up to temp, especially if you have a turbo. I've seen engine blocks suffer an ill fate due to being revved really high when cold.

A block heater is another thing you would be able to integrate (even easier). That will make your car easier to start and will improve winter fuel economy by up to 10% (according to the Canadian environmental ministry).

Also, if it's so cold that you are considering the need to warm up your car, a little global warming couldn't hurt! (KIDDING!)


Leave a comment


Subscribe to MAKE!Subscribe to MAKE Magazine!

Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.

$34.95 / 1 year
(4 Quarterly Issues)

Subscribe now

How-to videos for Makers and Crafers!


Void your warranty, violate a user agreement, fry a circuit, blow a fuse, poke an eye out... Welcome to the Make Blog!



Make: television
The online premiere of Make: television is January 3rd 2009, visit makezine.tv or iTunes to see the entire first episode! The broadcast premiere will follow shortly after depending on when your local Public Television station airs it.

Happy New Year from MAKE!

MAKE's 2009 New Year's message.
What we're making in 2009.


MAKE's RSS feed is here.
Add MAKE to iGoogle - GoogleGoogle.
How to add MAKE to your RSS reader - Real simple.
Add MAKE on Twitter.
MAKE's fan page on Facebook.
Add MAKE on FriendFeed


Advertise here with FM.

Why advertise on MAKE?
Read what folks are saying about us!

Click here to advertise on MAKE!

Subscribe to MAKE Magazine!

Nvidia Rail

Makezine authors!

Phillip Torrone
Senior Editor
Tel: 707-827-7311
Twitter / AIM

Gareth Branwyn
Jonah Brucker-Cohen
Chris Connors
Collin Cunningham
Marc de Vinck
Mike Dixon
Peter Horvath(intern)
Kip Kay
Luke Iseman
John Park
Patti Schiendelman
Becky Stern
Jason Striegel

Suggest a Site!

Current Podcast

itunesdl.gif Weekend Project: Simple Laser Communicator (PDF) Secretly shoot your voice across the room on a laser beam. Thanks go to Simon Quellen Field for the original article in Make: Volume 16 View the PDF... More...

Get the Make blog sent via email

Enter your email to receive the Make blog each day:



WOW! Thanks to everyone involved with Maker Faire Bay Area and Maker Faire Austin in 2008: attendees, makers, exhibitors, sponsors, volunteers, and crew...it was an AMAZING year! Over 1,000 Makers and 87,000+ attendees total! Be sure to check out the photos @ Flickr, and our Maker Faire posts for all the action! Check back for dates for 2009 soon!

Make Categories

www.flickr.com
photos in MAKE More photos in MAKE Flickr Pool
www.flickr.com
photos in Craft More photos in Craft Flickr Pool

Advertise here.
Why advertise on MAKE?
Read what folks are saying about us!

Click here to advertise on MAKE!
Subscribe to MAKE Magazine!

Recent Posts from the Craft: Blog

Recent Posts from the Hackszine Blog