RepRap wasn’t built in a day (time lapse video)


Adrian built a RepRap (open source 3D printer) and filmed a time lapse video of the construction, he writes –

At the end of last week I assembled our first RepRap Version 1.0 “Darwin” from scratch and shot a time-lapse video of the entire thing at one frame every three seconds. It took me four and a half hours spread over two days (I have to teach sometimes…).

…This is the first time that I have built the machine (all my work so far has been on extruders), and it went perfectly from his instructions on the RepRap Wiki here. Also, the way that he uses bits of the part-constructed machine as jigs and templates to allow one accurately to build and align other bits is, frankly, inspired. You will notice that the only measurements that I make are with an ordinary tape measure.

RepRap: RepRap wasn’t built in a day – RepRap Blog – Link.

Related:

  • RepRap, viral confections, wind-composition… – Link.
  • Liquid ABS plastic – Link.
  • 3D printer to churn out copies of itself – Link.
Discuss this article with the rest of the community on our Discord server!
Tagged

current: @adafruit - previous: MAKE, popular science, hackaday, engadget, fallon, braincraft ... howtoons, 2600...

View more articles by Phillip Torrone

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK