PlayPumps - Kid powered merry-go-round water pumps

7Steps
Img413 918
These merry-go-rounds use kid power to pump water in developing countries, so far 700 PlayPumps have been installed in South Africa - "While children have fun spinning on the PlayPump (1), clean water is pumped (2) from underground (3) into a 2,500-liter tank (4), standing seven meters above the ground. A simple tap (5) makes it easy for women and children to draw water. Excess water is diverted from the storage tank back down into the borehole (6). The water storage tank (7) provides a rare opportunity to advertise in rural communities. All four sides of the tank are leased as billboards, with two sides for consumer advertising and the other two sides for health and educational messages. The revenue generated by this unique model pays for pump maintenance. The design of the PlayPump makes it highly effective, easy to operate and very economical, keeping costs and maintenance to an absolute minimum. Capable of producing up to 1,400 liters of water per hour at 16 rpm from a depth of 40 meters, it is effective up to a depth of 100 meters. " [via] - Link. & how it works.

Posted by Phillip Torrone | Jul 15, 2006 01:23 PM
Made On Earth | Permalink | Comments (9)

Recent Entries

Comments

Oldest comments listed first.

  • This is extremely well thought out from every angle.
    I wonder how hard it would be to divert the extra water being pumped and sent back when the tanks is full to some other purpose (I doubt electrical power generation would be reasonable, but the potential energy of water ina a standing tank is fantastic and could be used for powering a grinder). I'm assuming the ammount of water the tank stores and the ammount used vs the ammount pumped is fairly balanced out though. The addition of billboards for revenue is a fantastic addition. Maybe add some solar pannels on the top? But then you'd get a lot of heat buildup in the tank? Would there be enough pannel area to generate a valid ammount of power?

    I'd love to see more stuff like this, even not targeted at 3rd world or technologically/economically lagging countries. The fact that it combines so many elements to help the community, and is so technologically simple yet effective shows how GOOD engineering and well thought out ideas can save the world.

    Posted by: Kagetsuki on July 16, 2006 at 10:27 PM

  • I saw this on Frontline and was inspired enough to show the piece to my kids who immediately started raisng funds at their local school to send to the project. They were impressed not only by the usefulness to the community, but also beacuse they felt all kids, everywhere should have somewhere to play. They also wondered about generating power, but realised that fresh drinking water is the issue, not electricity.

    Agree with the earlier comment about more projects like this with simple technology to solve real local problems. Reminds me of another project I saw which had a human powered generator/pump built from a bicycle frame. Great examples of Low Tech solving Big Problems.

    Posted by: ShadowyMan on July 17, 2006 at 12:31 PM

  • "A simple tap (5) makes it easy for women and children to draw water."

    I didn't think anyone talked like this anymore. Is it difficult for men to get draw water this way?

    Posted by: entropomorphic on July 17, 2006 at 1:42 PM

  • Be careful you don't burden third world people with first world ideals. Let them develop at their own speed. When they have plenty of idle time to sit around and philosophize, perhaps they'll think about freedom of the sexes. Food and water first.

    Posted by: WonderWheeler on July 18, 2006 at 1:29 PM

  • Be careful you don't burden third world people with first world ideals. Let them develop at their own speed. When they have plenty of idle time to sit around and philosophize, perhaps they'll think about freedom of the sexes. Food, water and shelter first.

    Posted by: WonderWheeler on July 18, 2006 at 1:29 PM

  • I don't get it. How is this better than just installing a simple, old-fashioned hand pump?

    Posted by: airship on July 18, 2006 at 2:06 PM

  • It kills several birds with one stone.

    entertainment for kids
    advertizing for businesses
    emergency water supply for fire fighting (perhaps)
    provides regular safe water supply
    uses free energy
    simple enough to build

    Posted by: WonderWheeler on July 19, 2006 at 2:19 PM

  • Interesting update of an older post.

    Posted by: richardkarnesky on July 26, 2006 at 4:53 PM

  • First the idea seems great. But as a technologist I am always interested in how something works. No where in all the prose by and about Play Pumps does the organization reveal how the pump itself works. Is it simply an automated flapper valve on a reciprocating rod i.e. like the old windmill and hand pumps or did the "inventor" really develop a new mechanism for the actual pump? Every thing written about this system studiously avoids describing the pump BUT implies that it is patented leading one to the idea that it is something new and unique. Let Play Pump add a description of the pump mech to their story so that all can truly understand.

    Posted by: wildduck on December 26, 2007 at 3:21 PM


Your comment will be posted in the background and may take a few minutes to appear on the site; you do not need to re-post.

Allowable html: a href,br/,p,b,strong,em,i,ol,ul,li,blockquote,pre

Name:

Comment:


Please enter the security code you see here

Subscribe to MAKE!Subscribe to MAKE Magazine!

Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.

$34.95 / 1 year
(4 Quarterly Issues)

Subscribe now

How-to videos for Makers and Crafers!


Void your warranty, violate a user agreement, fry a circuit, blow a fuse, poke an eye out... Welcome to the Make Blog!

Features and more @ MAKE!

MAKE @ The NYC Toy Fair 2008 - Covering DIY!
HOW TO - Build the arms of assistance.

MADE in Japan - Part I.
MADE in Japan - Part II.
MADE in Japan - Part III.

Make store - Blinky bug kit - Blink!
Make store - Loud Objects Noise Toy Kit

Makers - MAKE Flickr pool contest. Win cool stuff!
Makers - Join the MAKE Facebook page - Meet other makers.
MAKE on Twitter - Tweet! Tweet!
What you're reading in MAKE - Data!
Add MAKE to your RSS reader - Real simple.


Advertise here with FM.

Why advertise on MAKE?
Read what folks are saying about us!

Click here to advertise on MAKE!

Subscribe to MAKE Magazine!


Phillip Torrone.Phillip Torrone
Senior Editor
Tel: 707-827-7311


Gareth BranwynGareth Branwyn
Robot Maker


Jonah Brucker-Cohen Jonah Brucker-Cohen
Researcher

Suggest a Site!

Natalie Zee DrieuNatalie Zee Drieu
Senior Editor
CRAFT


Becky Stern Becky Stern
Culture jammer


Collin CunninghamCollin Cunningham
Sound Maker


Marc de Vinck Marc de Vinck
CNC Maker

Current Podcast

itunes_p.jpg AHAB High Altitude Ballooning - Best of Weekend Projects mp4|mov|hd|3gp|3g2|itunes This week on Best of Weekend Projects, we look back at part two of the AHAB (High Altitude Balloon Adventure). In this epic Bre & Co. travel to Eastern Washington to launch a GPS and camera enabled balloon... More...

Get the Make blog sent via email

Enter your email to receive the Make blog each day:



WOW! Thanks to everyone involved with Maker Faire Austin: attendees, makers, exhibitors, sponsors, volunteers, and crew...it was AMAZING! Over 350 Makers and 20,000 attendees! Be sure to check out the photos @ Flickr, and our Maker Faire posts for all the action! Next year, scheduled Maker Faire's are: Bay Area: May 3rd & 4th, 2008 - San Mateo County Fairgrounds and Austin: Oct. 18th & 19th, 2008 - Travis County Expo Center!

Make Categories

www.flickr.com
photos in MAKE More photos in MAKE Flickr Pool
www.flickr.com
photos in Craft More photos in Craft Flickr Pool

Advertise here.
Why advertise on MAKE?
Read what folks are saying about us!

Click here to advertise on MAKE!
Subscribe to MAKE Magazine!

Recent Projects

From the Instructables MAKE group


Important please read

Recent Posts from the Craft: Blog

Recent Posts from the Hackszine Blog