RSSHOW TO - Build a 15,000 rpm Tesla Turbine using hard drive platters
Luke Luck writes - "Here's a project that uses some of those dead hard drives you've got lying around. In the Tesla Turbine, air, steam, oil, or any other fluid is injected at the edge of a series of smooth parallel disks. The fluid spirals inwards and is exhausted through ventilation ports near the center of the disks. A regular blade turbine operates by transferring kinetic energy from the moving fluid to the turbine fan blades. In the Tesla Turbine, the kinetic energy transfer to the edges of the thin platters is very small. Instead, it uses the boundary layer effect, i.e. adhesion between the moving fluid and the rigid disk. This is the same effect that causes drag on airplanes. To build a turbine like this, you need some dead hard drives, some stock material (aluminum, acrylic), a milling machine with a rotary table, and a lathe with a 4 jaw chuck." - Link.
Posted by Phillip Torrone |
May 25, 2006 10:00 PM
Crafts, Electronics |
Permalink
| Comments (2)
Recent Entries
- HOW TO - build a water mortar
- Jake's steamcar project, dashboard redo
- Build your own water quality tester
- MAKE @ Yahoo! Buzz
- Made in Japan Vol. 3
- Super Breakout version allows for competitive or collaborative gaming
- How DIYers just might revive American innovation
- Light-Field camera makes blurry images a thing of the past
- Make a pizza box solar oven
- DIY Security system calls your phone
Comments
Oldest comments listed first.
Cool idea, specially with high precision part of a hard drive, it should work (atleast at 7200rpm)!
Zafar
---------------------
http://www.vbuniverse.com
Cool idea, specially with high precision part of a hard drive, it should work (atleast at 7200rpm)!
Zafar
---------------------
http://www.vbuniverse.com
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
Features and more @ MAKE!
MAKE @ The NYC Toy Fair 2008 - Covering DIY!HOW TO - Build the arms of assistance.
MADE in Japan - Part I.
MADE in Japan - Part II.
MADE in Japan - Part III.
Make store - Blinky bug kit - Blink!
Make store - Loud Objects Noise Toy Kit
Makers - MAKE Flickr pool contest. Win cool stuff!
Makers - Join the MAKE Facebook page - Meet other makers.
MAKE on Twitter - Tweet! Tweet!
What you're reading in MAKE - Data!
Add MAKE to your RSS reader - Real simple.
Why advertise on MAKE?
Read what folks are saying about us!
Click here to advertise on MAKE!
Phillip Torrone
Senior Editor
Tel: 707-827-7311
Gareth Branwyn
Robot Maker
Jonah Brucker-Cohen
Researcher
Natalie Zee Drieu
Senior Editor
CRAFT
Becky Stern
Culture jammer
Collin Cunningham
Sound Maker
Marc de Vinck
CNC Maker
Current Podcast
AHAB High Altitude Ballooning - Best of Weekend Projects
mp4|mov|hd|3gp|3g2|itunes This week on Best of Weekend Projects, we look back at part two of the AHAB (High Altitude Balloon Adventure). In this epic Bre & Co. travel to Eastern Washington to launch a GPS and camera enabled balloon...
More...
