Make:

Comments

Oldest comments listed first.

• This is a really neat idea. Many years ago a couple of Brits came up with the exact same thing, using laser to read LP's and 45's. They quickly discovered that the old needle added something quite valuable: it shoves tiny dirt out of the way and 'rolls over' other very minor disturbances. The laser, however, sees all of these things and so it plays back the signal in what one could argue is essentially lower fidelity than a needle, unless you heavily filter the signal. Heavy filtering is typically a no-no in the world of music purists. I wonder how these guys solved the problem. A simple rotating brush with a vacuum or blower tube, maybe?

  Posted by: wsuverkropp on May 12, 2005 at 3:09 PM

• They haven't solved the problem as far as I know. I've been following these guys on audiophile websites for years and this device is a very poor implementation of this technology. People that have heard this have said that its a very low fidelity device. While it sounds like a great idea current state of the art old style vinyl playback technology beats this by a mile.

  Posted by: taricha on May 12, 2005 at 5:34 PM

• This type of player has appeared off and on since
  the 1980s. As I recall, I heard one in the mid
  eighties that had technology to read deep in the
  groove where no needle had ever touched the vinyl.
  It sold for about 2K$.

  I'm not impressed

  Smell

  Posted by: smellfungus on November 17, 2006 at 3:14 PM

• This is basically miniature 3d scanning. If you can get a very fine laser line it might work with a webcam (different optics of course).

  Or use two webcams looking at the grooves at an angle. 3d mesh extraction and z-movement of the lens would be done in software.

  Posted by: tantris on February 15, 2008 at 12:06 PM

Subscribe to MAKE Magazine!

Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.

$34.95 / 1 year
(4 Quarterly Issues)

Subscribe now