Duct Tape stress tests
If you're wondering what the strength of duct tape might be Make reader Taylor reports in with some possible clues...I decided I needed a hammock in my dorm room, and what better way than duct tape. I attached 4 strips on either side to the ceiling, making a loop at the bottom. I then used some clothes line and 2 carabiners to attach the hammock. The whole setup can hold my 200 lb friend (he fell asleep for 4 hrs in it). Under that stress each strip is holding around 25 lbs (assuming the weight was equally distributed, which I did my best to do). I haven't pushed it to the limits yet, maybe this weekend I'll see just how much it can take (Photo 1, Photo 2, Photo 3).
Posted by Phillip Torrone |
Apr 5, 2005 07:15 AM
|
Permalink
| Comments (8)
Recent Entries
- HOW TO - build a water mortar
- Jake's steamcar project, dashboard redo
- Build your own water quality tester
- MAKE @ Yahoo! Buzz
- Made in Japan Vol. 3
- Super Breakout version allows for competitive or collaborative gaming
- How DIYers just might revive American innovation
- Light-Field camera makes blurry images a thing of the past
- Make a pizza box solar oven
- DIY Security system calls your phone
Comments
Oldest comments listed first.
Many years ago (ca 1955 - 1958) I fastened a bookshelf to a wall using essentially the same technique (I used gummed picture hangers). It worked perfectly for several months, then I was awakened one night by a tremendous crash. Examination showed that there was a failure of the bond between the paint and the plaster on the wall, rather than the bond between the hangers and the paint. Think of the shock of being dumped out of a hammock in the middle of the night!
one party (geeky party) it got decided to see how much tape would be required to tape a bowling ball to a wall.. us geeks of all trades ve engineers,
we won, only took 10feet.. they used most of a roll, and their bowling ball fell in an hour, ours stayed for 3 days...
trick? 2 long strips one making kind of a '6' shape sling with some cross bracing at the bottom (the bowling ball held in the sling kept the lower part held against the wall, ) and we ran it up at enough of an angle, we could brace the top with 2 1' cross braces..
The duct tape capacity in this setup will probably be based on the tensile strength of the tape itself, rather than the adhesive properties. With sufficient surface area and loading the tape in shear, the adhesive strength should exceed the tensile capacity of the tape. You can see for yourself using simple Scotch tape. Tape a strip with about 12" adhered to a desk, and pull in shear. The tape itself will break before the adhesive gives.
Posted by: zlgeraibegnst@mailinator.com on April 6, 2005 at 6:43 PM
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
Features and more @ MAKE!
MAKE @ The NYC Toy Fair 2008 - Covering DIY!HOW TO - Build the arms of assistance.
MADE in Japan - Part I.
MADE in Japan - Part II.
MADE in Japan - Part III.
Make store - Blinky bug kit - Blink!
Make store - Loud Objects Noise Toy Kit
Makers - MAKE Flickr pool contest. Win cool stuff!
Makers - Join the MAKE Facebook page - Meet other makers.
MAKE on Twitter - Tweet! Tweet!
What you're reading in MAKE - Data!
Add MAKE to your RSS reader - Real simple.

Why advertise on MAKE?
Read what folks are saying about us!
Click here to advertise on MAKE!
Phillip Torrone
Senior Editor
Tel: 707-827-7311
Gareth Branwyn
Robot Maker
Jonah Brucker-Cohen
Researcher
Natalie Zee Drieu
Senior Editor
CRAFT
Becky Stern
Culture jammer
Collin Cunningham
Sound Maker
Marc de Vinck
CNC Maker
Current Podcast
AHAB High Altitude Ballooning - Best of Weekend Projects
mp4|mov|hd|3gp|3g2|itunes This week on Best of Weekend Projects, we look back at part two of the AHAB (High Altitude Balloon Adventure). In this epic Bre & Co. travel to Eastern Washington to launch a GPS and camera enabled balloon...
More...

